服務熱線：手機號碼：19121166298
地 址：上海市北京東路668號科技京城東樓27樓C1室
BALLUFF機械式傳感器BNS02WA
更新時間：2017-04-30 點擊次數：611次
概覽
單個位置開關
順序位置開關
轉換機構
單個位置開關應用示例
凸輪鑲條和開關凸輪 單個位置開關 插接器與連接導線
順序位置開關應用示例
凸輪鑲條和開關凸輪 順序位置開關 插接器與連接導線
轉換機構應用示例
附件 轉換機構 適合的固定件
機械式傳感器用于在機床、 壓床、柔性加工中心、機器人、裝配與 輸送裝置、機械制造和儀器制造領域內進行 定位及終端斷開。幾十年來，這種堅固的 自動化傳統裝置證明了自身出色的性能。
優勢
可靠堅固：即使在惡劣環境下也能發揮良好效用
能在振動、沖擊、快速溫度波動 、腐蝕性冷卻潤滑劑及多碎屑等環境下 正常運行
機械式傳感器 - 貼合您的要求
Keyfeatures
| Connection | 1. screw terminal, 2. screw terminal, 3. screw terminal, 4. screw terminal |
|---|---|
| Design | 61 |
| No. of switch positions | 4 |
| Switching element | 1st pos.: BSE 85, 2nd pos.: BSE 85, 3rd pos.: BES 517-110, 4th pos.: BES 517-110 |
| Plunger style | 1st pos.: Chisel, 2nd pos.: Chisel |
General attributes
| Mechanical installation condition | Vertical |
|---|---|
| Function indicator | 1st pos.: none, 2nd pos.: none, 3rd pos.: none, 4th pos.: none |
| Enclosure Type per IEC 60529 | IP67 |
| Additional features | Special switch |
| DIN switch | No |
Electrical attributes
| Rated operating voltage Ue | 1st pos.: 250 V AC, 2nd pos.: 250 V AC, 3rd pos.: 24 V DC, 4th pos.: 24 V DC |
|---|---|
| Continuous current | |
| Switching function mech | Double-interrupting, Dual output function, Galvanically isolated, NC forced-opening per VDE, Normally open with snap funct., One NO and one NC |
| Connection | 1. screw terminal, 2. screw terminal, 3. screw terminal, 4. screw terminal |
Mechanical attributes
| Rated operating distance Sn | 2 mm 2 mm |
|---|---|
| Assured operating distance Sa | 0...3rd pos.: 0 - 1.6 mm mm 0...4th pos.: 0 - 1.6 mm mm |
| Shock rating | max. 100g / 2ms |
| Vibration rating | 10-500 Hz, 3 mm pp, 20 g |
| Ambient temperature Ta max. | 70 °C |
| Ambient temperature Ta min. | -5 °C |
| Housing material | Aluminum |
| Version | Safety EN 60204-1 |
| Contact material | 1st pos.: silver, 2nd pos.: silver |
| Design | 61 |
| Repeatability max. | 1st pos.: +/-0.002 mm 2nd pos.: +/-0.002 mm |
| Dist. cam to reference edge | 1st pos.: 5 - 0.5 mm, 2nd pos.: 5 - 0.5 mm |
| Type | Mech. multiple position |
| Operating principle | 1st pos.: mechanical, 2nd pos.: mechanical, 3rd pos.: inductive, 4th pos.: inductive |
| Connection | 1. screw terminal 2. screw terminal 3. screw terminal 4. screw terminal |
| Plunger material | 2nd pos.: stainless steel, 1st pos.: stainless steel |
| Approach speed | 1st pos.: 40 m/min, 2nd pos.: 40 m/min |
| Switching rate | 1st pos.: max. 160/min, 2nd pos.: max. 160/min |
| Flange feed-through | None |
| Mechan. life expectancy min. | 1st pos.: 1 mil. operations, 2nd pos.: 1 mil. operations |
| Approach direction | Lengthwise, par. to mtg. surf. |
| No. of switch positions | 4 |
| Diameter of active surface | 10 mm |
| Housing finish | Eloxal |
| Switching operation force | 1st pos.: min. 30 N, 2nd pos.: min. 30 N |
| Switching element | 1st pos.: BSE 85, 2nd pos.: BSE 85, 3rd pos.: BES 517-110, 4th pos.: BES 517-110 |
| Connector | None |
| Plunger diameter | |
| Plunger style | 1st pos.: Chisel, 2nd pos.: Chisel |
| Plunger block | No |
